Embark on an journey with the Timex Expedition Watch, a rugged timepiece engineered for essentially the most discerning explorers. Its strong development, dependable efficiency, and intuitive design make it an indispensable companion on your out of doors endeavors. Whether or not you are navigating treacherous trails or conquering towering peaks, the Timex Expedition Watch will hold you on observe with unwavering precision.
To make sure that your Timex Expedition Watch stays a steadfast information, it is important to set it precisely. With its complete options and user-friendly interface, setting the time is a seamless course of. By following a number of easy steps, you possibly can synchronize your watch with the atomic clock, making certain it shows the right time wherever your adventures take you.
Moreover, the Timex Expedition Watch gives superior performance, together with an alarm, stopwatch, and countdown timer. These versatile options empower you to handle your time successfully and keep organized throughout your expeditions. Whether or not you are planning a dawn hike or assembly a rendezvous level, the Timex Expedition Watch supplies the instruments you have to maximize your time and take advantage of your out of doors adventures.
Setting the Alarm Perform
To set the alarm operate in your Timex Expedition watch, comply with these steps:
- Press and maintain the MODE button till the Alarm display seems.
- Use the START/STOP button to navigate to the hour setting.
- Press the INDIGLO button to vary the hour setting.
- Press the MODE button to maneuver to the minute setting.
- Press the INDIGLO button to vary the minute setting.
- Press the MODE button to maneuver to the AM/PM setting.
- Press the START/STOP button to toggle between AM and PM.
- Press the MODE button to save lots of the alarm settings.
To activate the alarm:
- Be certain that the alarm time is ready accurately.
- Press the ALARM ON/OFF button to activate the alarm.
- The alarm will sound on the set time for 20 seconds.
To deactivate the alarm:
- Press the ALARM ON/OFF button to show off the alarm.
To snooze the alarm:
- When the alarm sounds, press the MODE button to snooze the alarm.
- The alarm will sound once more after 10 minutes.
- You’ll be able to snooze the alarm as much as seven instances.
Activating the Stopwatch
To activate the stopwatch in your Timex Expedition watch, comply with these steps:
- Press the highest proper button as soon as to enter stopwatch mode.
- Press the underside proper button to begin the stopwatch.
- Press the underside proper button once more to cease the stopwatch.
- Press the highest proper button once more to reset the stopwatch and return to timekeeping mode.
| Button | Motion |
|---|---|
| High proper | Enterstopwatch mode/Resetstopwatch |
| Backside proper | Begins/ Stops stopwatch |
Extra Ideas
- You need to use the stopwatch to time occasions as much as 100 hours.
- The stopwatch will proceed to run within the background, even should you exit stopwatch mode.
- To view the stopwatch time whereas in different modes, press and maintain the highest proper button.
Setting the Time and Date
1. Pull out the crown to the primary place (one click on). Rotate the crown clockwise to regulate the hour and counter-clockwise to regulate the minutes.
2. Pull out the crown to the second place (two clicks). Rotate the crown clockwise to regulate the date and counter-clockwise to regulate the month.
3. Push within the crown to the primary place to save lots of the date and month settings.
4. Pull out the crown to the second place once more and rotate the crown counter-clockwise to set the day of the week.
5. Push within the crown to the primary place to save lots of all settings. To set the 12/24 hour format, pull out the crown to the second place and press the highest proper button. The show will present both “12” or “24”. Press the highest left button to toggle between the 2 codecs. Push within the crown to save lots of the setting.
Using the Compass Characteristic (if relevant)
1. Pull out the crown to the primary place and rotate it counter-clockwise to deliver up the compass mode.
2. The show will present a compass needle. Rotate the watch till the needle aligns with magnetic north.
3. Push within the crown to save lots of the setting.
4. To make use of the compass, merely maintain the watch degree with the compass needle pointing in direction of magnetic north.
5. The bezel can be utilized to mark a bearing. Align the specified bearing with the “0” mark on the bezel.
6. Rotate the watch till the compass needle aligns with the “0” mark on the bezel.
7. The bearing will now be displayed within the show.
| Button | Perform |
|---|---|
| High left | Toggle between 12/24 hour format |
| High proper | Set 12/24 hour format |
| Backside left | Choose mode |
| Backside proper | Begin/cease stopwatch |
Setting the Time
1. Pull the crown out to place 2.
2. Flip the crown clockwise to set the hour and counterclockwise to set the minutes.
Setting the Date
1. Pull the crown out to place 1.
2. Flip the crown clockwise to set the date.
Setting the Alarm
1. Pull the crown out to place 2.
2. Flip the crown clockwise to set the alarm hour and counterclockwise to set the alarm minutes.
Setting the Chronograph
1. Press the highest button to begin the chronograph.
2. Press the underside button to cease the chronograph.
3. Press the highest button once more to reset the chronograph.
Setting the Compass
1. Maintain the watch horizontally with the compass dial dealing with you.
2. Rotate the bezel till the crimson triangle aligns with the north indicator on the dial.
Setting the Barometer (if relevant)
1. Pull the crown out to place 3.
2. Rotate the crown clockwise to set the barometer to the present strain.
| Altitude | Stress (hPa) |
|---|---|
| Sea degree | 1013 |
| 5000 toes | 899 |
| 10000 toes | 795 |
Utilizing the Indiglo® Night time-Gentle
To activate the Indiglo® night-light, press the pusher on the 4 o’clock place. The watch face will illuminate for a number of seconds. To show off the sunshine, press the pusher once more.
Adjusting the Time and Date
- Pull the crown out to the second place (one click on).
- Flip the crown clockwise to set the hour.
- Pull the crown out to the third place (two clicks).
- Flip the crown clockwise to set the minutes.
- Flip the crown counterclockwise to set the month and day.
- Push the crown again in to the primary place (one click on) to save lots of the settings.
Adjusting the Alarm
- Pull the crown out to the second place (one click on).
- Flip the crown counterclockwise to set the hour.
- Pull the crown out to the third place (two clicks).
- Flip the crown counterclockwise to set the minutes.
- Push the crown again in to the primary place (one click on) to save lots of the settings.
Setting the Timer
- Press the Mode button to enter the timer mode.
- Use the Begin/Cease button to begin and cease the timer.
- Use the Reset button to reset the timer.
Utilizing the Compass
- Maintain the watch degree and regular.
- Flip the bezel till the arrow factors north.
- To find out the path of journey, maintain the watch degree and switch your self till the arrow factors to the specified path.
Calibrating the Altimeter (if relevant)
To calibrate the altimeter, you have to to know your present altitude. You’ll find this data on-line or from a neighborhood climate station.
- Press the Mode button till the altimeter mode is chosen.
- Maintain down the Set button for 3 seconds.
- Use the Begin/Cease button to regulate the altitude to your present altitude.
- Press the Set button to save lots of the settings.
The altimeter will now be calibrated to your present altitude.
Utilizing the Barometer (if relevant)
- Press the Mode button till the barometer mode is chosen.
- To view the present barometric strain, press the Begin/Cease button.
- To view the barometric strain development, press the Set button.
Adjusting the Distinction Stage
The Timex Expedition watch gives a variety of distinction ranges to make sure optimum readability in any lighting situation. To regulate the distinction, comply with these steps:
- Press and maintain the “Mode” button for 3 seconds.
- Press the “Begin/Cease” button to scroll by the distinction ranges (0-10).
- Choose the specified distinction degree by urgent the “Mode” button.
- Maintain the “Mode” button for 3 seconds to save lots of the settings.
The next desk supplies an in depth description of every distinction degree:
| Distinction Stage | Description |
|---|---|
| 0 | Lowest distinction degree, appropriate for dim lighting |
| 5 | Medium distinction degree, appropriate for reasonable lighting |
| 10 | Highest distinction degree, appropriate for brilliant daylight |
By adjusting the distinction degree, you possibly can customise the watch’s show to fit your particular lighting situations and visible preferences.
10. Restoring Manufacturing unit Default Settings
In case you encounter persistent points along with your Timex Expedition watch, restoring manufacturing facility default settings might resolve them. This course of erases all customized configurations and saved information, returning the watch to its authentic setup.
| Steps | Directions |
|---|---|
| 1 | Press and maintain the “Mode” button for five seconds to enter the settings menu. |
| 2 | Use the “Begin/Cease” button to navigate to the “Manufacturing unit Reset” choice. |
| 3 | Press the “Mode” button to verify the reset. |
| 4 | Press the “Begin/Cease” button to pick out “Sure” and provoke the reset. |
| 5 | The watch will show “Resetting” and reset to its manufacturing facility settings. |
Word: Restoring manufacturing facility default settings will erase all alarm settings, customized show configurations, and any saved lap or break up instances.
How To Set Timex Expedition Watch
Setting Timex Expedition Watch Time
- Pull out the crown to the primary place, the time will probably be set now.
- Flip the crown both clockwise or anti-clockwise to maneuver the hour hand round and set the right time.
- After setting the time accurately, ensure that to push the crown again to the traditional place.
- Pull out the crown to the second place, and you’ll hear a small click on sound.
- Flip the crown both clockwise or anti-clockwise to maneuver the date ahead or backward( is determined by which ever manner your flip the crown).
- After setting the date, ensure that to push the crown again to regular place
Setting Timex Expedition Watch Date
Individuals additionally ask about How To Set Timex Expedition Watch
How do you set the time and date on a Timex Expedition watch?
To set the time and date on a Timex Expedition watch, you have to to drag out the crown to the primary place to set the time and second place to set the date. After you have pulled out the crown, you possibly can flip it both clockwise or anti-clockwise to maneuver the arms or date ahead or backward. After setting the time and date, ensure that to push the crown again to the traditional place.
How do you modify the battery in a Timex Expedition watch?
To vary the battery in a Timex Expedition watch, you have to to take away the again of the watch. To do that, you need to use a small screwdriver or a coin to unscrew the again of the watch. After you have eliminated the again of the watch, you will note the battery. You’ll be able to then use a small screwdriver or your fingernail to take away the battery. To switch the battery, merely insert the brand new battery into the watch and screw the again of the watch again on.
How do you set the alarm on a Timex Expedition watch?
To set the alarm on a Timex Expedition watch, you have to to drag out the crown to the second place. After you have pulled out the crown, you possibly can flip it both clockwise or anti-clockwise to maneuver the alarm hand ahead or backward. After setting the alarm, ensure that to push the crown again to the traditional place.
