Whether or not you are upgrading your graphics card or troubleshooting an issue, understanding the right way to take away it safely and effectively is important. Graphic playing cards are delicate parts, so it is vital to take care when dealing with them. On this information, we’ll stroll you thru the step-by-step strategy of eradicating a graphics card out of your pc, making certain that you just do it with out inflicting any harm.
Earlier than you start, energy down your pc and unplug it from the ability outlet. It will stop any electrical shocks or harm to the parts. Subsequent, open your pc case and find the graphics card. It should usually be put in in a PCI Categorical (PCIe) slot on the motherboard. As soon as you have discovered the graphics card, you may must launch the retaining clip that holds it in place. The clip is normally positioned on the finish of the PCIe slot, and it may be launched by urgent down on it or sliding it to the facet.
As soon as the retaining clip is launched, you’ll be able to fastidiously pull the graphics card straight up and out of the PCIe slot. Make sure you help the cardboard along with your different hand to stop it from bending or breaking. If the cardboard is caught, don’t power it. As a substitute, test to make it possible for all the retaining clips are launched and that there aren’t any cables or different obstructions stopping the cardboard from being eliminated. With the graphics card eliminated, now you can proceed along with your improve or troubleshooting.
Eradicating the Screws
The subsequent step in eradicating your graphics card is to find and take away the screws which might be holding it in place. These screws are usually positioned on the again of the cardboard, close to the I/O panel. They’re normally small, Phillips-head screws, however they could differ relying on the make and mannequin of your graphics card. To take away the screws, you will have a small Phillips-head screwdriver.
After getting positioned the screws, fastidiously unscrew them. Make sure you help the graphics card along with your different hand as you do that, in order that it doesn’t fall out of the slot. As soon as the screws are eliminated, you’ll be able to gently pull the graphics card straight out of the PCIe slot. Watch out to not bend or harm the cardboard as you do that.
| Screw Location | Screw Sort | Screwdriver Required |
|---|---|---|
| Again of the graphics card, close to the I/O panel | Phillips-head screw | Phillips-head screwdriver |
Extra ideas for eradicating the screws:
- In case you are having hassle eradicating the screws, strive utilizing a magnetic screwdriver. It will assist to maintain the screws from falling out as you unscrew them.
- Watch out to not overtighten the screws if you reinstall the graphics card. This could harm the cardboard or the motherboard.
- If you happen to lose any of the screws, you’ll be able to normally discover replacements at your native ironmongery shop.
Pulling the Card Out
As soon as the cardboard is unlocked, you’ll be able to fastidiously pull it out of the motherboard slot. To do that, grasp the cardboard by the highest and backside edges and gently rock it forwards and backwards till it comes free. Don’t pull on the cardboard by the wires or connectors, as this might harm them.
As soon as the cardboard is free, raise it straight up and out of the slot. Watch out to not bend or harm the cardboard as you take away it.
Listed here are some further ideas for pulling the cardboard out:
- If the cardboard is caught, don’t power it. Gently rock it forwards and backwards till it comes free.
- Don’t contact the gold contacts on the cardboard.
- In case you are having hassle eradicating the cardboard, you should use a small flat-head screwdriver to softly pry it out of the slot.
As soon as the cardboard is eliminated, you’ll be able to retailer it in an anti-static bag till you’re prepared to put in it in one other pc.
Cleansing the Slot
As soon as you have eliminated your graphics card, it is a good suggestion to wash the slot it was put in in. Over time, mud and particles can construct up within the slot, which may trigger issues with the connection between your graphics card and your motherboard. To wash the slot, use a gentle, dry material or a compressed air can. Watch out to not harm the slot or its parts.
If the slot is especially soiled, you might want to make use of a cotton swab dipped in isopropyl alcohol to wash it. Make sure you let the alcohol dry utterly earlier than reinserting your graphics card.
Extra Ideas for Cleansing the Slot
- Use a flashlight to examine the slot for any particles or harm.
- If you happen to’re utilizing a compressed air can, maintain it upright and spray in brief bursts. Keep away from spraying straight into the slot.
- If you happen to’re utilizing a cotton swab dipped in isopropyl alcohol, be sure you wring out the swab earlier than inserting it into the slot.
- Let the alcohol dry utterly earlier than reinserting your graphics card.
How To Take away Graphic Card
Earlier than you start, energy down your pc and unplug it from the ability outlet. You may additionally must discharge any static electrical energy by touching a metallic object like a doorknob or radiator.
Subsequent, find the graphics card. It should normally be the biggest card in your pc, and it’ll have various ports on the again for connecting displays. As soon as you have discovered the graphics card, you can begin eradicating it.
To take away the graphics card, first take away the screws which might be holding it in place. There’ll normally be two or three screws, positioned on the again of the pc. As soon as the screws are eliminated, you’ll be able to gently pull the graphics card straight out of the slot.
If the graphics card is caught, you might want to make use of a screwdriver to softly pry it free. Watch out to not harm the graphics card or the motherboard.
As soon as the graphics card is eliminated, you’ll be able to disconnect the ability cables from the again of the cardboard. There’ll normally be one or two energy cables, relying on the kind of graphics card.
Now you’ll be able to set up your new graphics card. To do that, merely insert the brand new card into the slot on the motherboard and tighten the screws. Then, join the ability cables to the again of the cardboard. Lastly, energy in your pc and set up the drivers in your new graphics card.
