Are you bored with having to modify between the bathe and bathtub manually? A diverter valve can assist! This helpful system lets you simply swap the movement of water from the showerhead to the bathtub spout, and vice versa. Putting in a diverter valve is a comparatively easy challenge that may be accomplished in just a few hours. Here is a step-by-step information that can assist you get began.
Earlier than you start, you may want to assemble just a few instruments and supplies. You will want a diverter valve (obtainable at most {hardware} shops), a wrench, a screwdriver, and a few Teflon tape. After getting all the pieces you want, you can begin the set up course of. Step one is to close off the water provide to your bathe. Subsequent, take away the showerhead by unscrewing it from the bathe arm. As soon as the showerhead is eliminated, you may must take away the outdated diverter valve. To do that, merely unscrew the valve from the bathe arm. Now, you are prepared to put in the brand new diverter valve. Begin by wrapping the threads of the valve with Teflon tape, then screw the valve onto the bathe arm.
As soon as the diverter valve is put in, you possibly can reattach the showerhead. Activate the water provide to your bathe, and verify for leaks. If there aren’t any leaks, you are all set! Now you can benefit from the comfort of a diverter valve in your bathe.
Putting in the New Diverter Valve
1. Take away the Outdated Diverter Valve
Find the screws holding the outdated diverter valve in place and take away them. Gently pull the valve away from the pipe, taking care to not harm the threads.
2. Test the Threads
Examine the threads on the pipe and the brand new diverter valve. Be certain that they’re clear and freed from particles. If crucial, use a thread cleaner to take away any burrs or corrosion.
3. Apply Sealant
Apply a skinny layer of sealant to the threads of the brand new diverter valve. This may assist create a watertight seal.
4. Set up the Diverter Valve
Thread the brand new diverter valve onto the pipe by hand, guaranteeing it’s aligned accurately. Tighten it additional utilizing a wrench, being cautious to not overtighten.
5. Set up the Deal with
Find the deal with on the brand new diverter valve and align it with the slot on the valve physique. Slide the deal with onto the valve and safe it by tightening the screw.
6. Reattach the Escutcheon
Take the escutcheon (the ornamental plate surrounding the valve) and align it over the valve physique. Safe it by tightening the screws. Be certain that the escutcheon matches snugly towards the wall.
Extra Particulars for Step 6:
– If the escutcheon doesn’t match flush towards the wall, chances are you’ll want to make use of a spacer or washer to create a greater match.
– When tightening the escutcheon screws, keep away from overtightening, as this may harm the plate or the wall.
– If the escutcheon has a number of screws, tighten them in a star sample to make sure even stress distribution.
– As soon as the escutcheon is safe, verify for any gaps or leaks across the edge. If crucial, apply further sealant to seal any leaks.
Testing the Diverter Valve for Leaks
As soon as the diverter valve is put in, it is necessary to check it for leaks. This may make sure that the valve is functioning correctly and that there aren’t any water leaks.
To check the diverter valve for leaks, comply with these steps:
1. Activate the water provide to the bathe or tub.
2. Open the bathe or tub faucet and let the water run for a couple of minutes.
3. Test for any leaks across the diverter valve. If there are any leaks, tighten the packing nut or change the O-ring.
4. Repeat steps 1-3 for the bathtub spout.
5. Flip off the water provide to the bathe or tub.
6. Test for any leaks across the diverter valve. If there are any leaks, tighten the packing nut or change the O-ring.
7. If there aren’t any leaks, the diverter valve is put in and functioning correctly.
8. In case you are nonetheless experiencing leaks after following these steps, there could also be an issue with the diverter valve itself. On this case, you have to to exchange the diverter valve.
| Leak Location | Attainable Trigger | Answer |
|---|---|---|
| Across the diverter valve deal with | Free packing nut | Tighten the packing nut |
| Across the diverter valve physique | Broken O-ring | Substitute the O-ring |
| Across the bathe or tub spout | Free connection | Tighten the connection |
Learn how to Match a Diverter Valve
A diverter valve is a plumbing fixture that lets you management the movement of water between two totally different shops. This may be helpful for quite a lot of functions, reminiscent of diverting water from a showerhead to a tub spout, or from a kitchen sink to a dishwasher. Diverter valves are comparatively simple to put in, and could be finished in just a few easy steps.
Step 1: Collect your supplies.
You will want the next supplies to put in a diverter valve:
- Diverter valve
- Wrench
- Plumber’s tape
- Screwdriver
Step 2: Flip off the water provide.
Earlier than you start engaged on the diverter valve, it is very important flip off the water provide to the fixture. This may be finished by turning off the principle water valve in your dwelling, or by turning off the person water valve for the fixture.
Step 3: Take away the outdated diverter valve.
As soon as the water provide is turned off, you possibly can take away the outdated diverter valve. To do that, merely use a wrench to unscrew the nuts that maintain the valve in place. As soon as the nuts are free, you possibly can pull the valve off of the pipe.
Step 4: Set up the brand new diverter valve.
To put in the brand new diverter valve, merely reverse the steps that you just used to take away the outdated valve. First, apply a small quantity of plumber’s tape to the threads of the valve. Then, screw the valve onto the pipe. Lastly, tighten the nuts that maintain the valve in place.
Step 5: Activate the water provide.
As soon as the diverter valve is put in, you possibly can activate the water provide. Test for leaks across the valve, and tighten the nuts as crucial.
Step 6: Take a look at the diverter valve.
To check the diverter valve, merely activate the water and verify to ensure that the water is flowing to the proper outlet. If the water is just not flowing to the proper outlet, chances are you’ll want to regulate the place of the valve.
Individuals Additionally Ask
How do I do know if I want a diverter valve?
It’s possible you’ll want a diverter valve if you wish to management the movement of water between two totally different shops. For instance, chances are you’ll want a diverter valve if you wish to divert water from a showerhead to a tub spout, or from a kitchen sink to a dishwasher.
What are the various kinds of diverter valves?
There are two important sorts of diverter valves: push-pull diverter valves and lever diverter valves. Push-pull diverter valves are operated by pushing or pulling on a knob, whereas lever diverter valves are operated by shifting a lever up or down.
How do I select the appropriate diverter valve?
When selecting a diverter valve, that you must think about the next components:
- The kind of fixture you’re putting in the valve on
- The variety of shops you wish to management
- The movement fee of the water
- The fashion of the valve
- The worth of the valve
