Changing a bathtub faucet could look like a frightening process, however with the correct instruments and just a little know-how, it is a job that may be simply achieved by most do-it-yourselfers. By following these step-by-step directions, you’ll replace your rest room’s fixtures very quickly. So, collect your instruments, roll up your sleeves, and let’s get began on reworking your tub!
Earlier than you start, make sure that to assemble the mandatory instruments and supplies. You may want a brand new tub faucet, a wrench, a screwdriver, and a few plumber’s putty. After getting the whole lot you want, you are prepared to start out. Step one is to show off the water provide to the bathtub. As soon as the water is off, you’ll be able to detach the outdated faucet by loosening the nuts that maintain it in place. As soon as the outdated faucet is eliminated, you’ll be able to set up the brand new one by following the producer’s directions. Lastly, flip the water provide again on and verify for leaks. For those who discover any leaks, tighten the nuts till they cease.
Changing a bathtub faucet is a comparatively easy process that may be accomplished in just a few hours. By following these step-by-step directions, it can save you your self the price of hiring a plumber and benefit from the satisfaction of a job effectively executed. So, what are you ready for? Get began in the present day and provides your rest room a contemporary new look!
Shut Off the Water Provide
Find the Water Shut-Off Valves
Establish the shut-off valves beneath the sink or behind the tap. They’re often situated on the cold and hot water provide traces.
Flip Off the Valves
Use a wrench or pliers to show the valves clockwise till they’re fully closed. It is best to really feel resistance as you tighten them.
Take a look at the Shut-Off
Activate the tap to verify the water provide is totally off. If water nonetheless flows, verify the valves once more to make sure they’re absolutely closed and the washers are in good situation.
| Sizzling Water | Chilly Water | |
|---|---|---|
| Location: | Beneath the sink, subsequent to the recent water line | Beneath the sink, subsequent to the chilly water line |
| Route to Shut: | Clockwise | Clockwise |
Clear the Faucet Physique
Over time, the tap physique can accumulate filth, grime, and mineral deposits. This may have an effect on the looks and performance of the tap. To scrub the tap physique, comply with these steps:
- Flip off the water provide to the tap.
- Take away the aerator, if current.
- Use a comfortable fabric or sponge and delicate cleansing resolution to wipe down the tap physique.
- Rinse the tap physique with clear water.
If the tap physique is closely stained or discolored, you might want to make use of a stronger cleansing resolution, akin to a vinegar-water resolution or a industrial rest room cleaner. You should definitely rinse the tap physique totally after utilizing any cleansing resolution.
Here’s a desk summarizing the steps for cleansing the tap physique:
| Step | Directions |
|---|---|
| 1 | Flip off the water provide to the tap. |
| 2 | Take away the aerator, if current. |
| 3 | Use a comfortable fabric or sponge and delicate cleansing resolution to wipe down the tap physique. |
| 4 | Rinse the tap physique with clear water. |
Change the Trim Plate and Handles
As soon as the tap physique is put in, you’ll be able to substitute the trim plate and handles. The trim plate is the ornamental piece that covers the escutcheon plate and the handles are the levers or knobs that you simply use to manage the water move. To switch the trim plate, merely align it with the escutcheon plate and snap it into place. To switch the handles, insert the handles into the stems and tighten the set screws.
Step 7: Reattach the Sprayer Hose
The ultimate step is to reattach the sprayer hose. To do that, merely thread the hose onto the nipple on the bathtub spout and tighten it with a wrench. Guarantee that the hose isn’t kinked or twisted. As soon as the hose is connected, you’ll be able to activate the water and check the tap to guarantee that it’s working correctly.
| Step 7: Reattach the Sprayer Hose | |
|---|---|
| Find the nipple on the bathtub spout. | |
| Thread the sprayer hose onto the nipple. | |
| Tighten the hose with a wrench. | |
| Activate the water and check the tap. | |
How To Change Tub Faucet
Changing a bathtub faucet is a comparatively easy plumbing challenge that may be accomplished in just a few hours. By following these step-by-step directions, it can save you your self the price of hiring a plumber.
Earlier than you start, collect the mandatory instruments and supplies. You will have:
- Adjustable wrench
- Phillips head screwdriver
- Flat head screwdriver
- New tub faucet
- Plumber’s putty
- Teflon tape
After getting gathered your instruments and supplies, comply with these steps to interchange your tub faucet:
- Flip off the water provide to the bathtub.
- Open the tap to launch any residual water.
- Use the adjustable wrench to loosen the nuts that maintain the tap in place.
- Take away the outdated faucet from the bathtub.
- Apply a bead of plumber’s putty across the base of the brand new faucet.
- Wrap the threads of the brand new faucet with Teflon tape.
- Screw the brand new faucet into the bathtub.
- Tighten the nuts that maintain the tap in place.
- Activate the water provide to the bathtub.
- Verify for leaks.
Individuals Additionally Ask
How a lot does it value to interchange a bathtub faucet?
The associated fee to interchange a bathtub faucet will fluctuate relying on the kind of faucet you select and the complexity of the set up. Nevertheless, you’ll be able to anticipate to pay between $100 and $500 for the complete challenge.
Can I substitute a bathtub faucet myself?
Sure, you’ll be able to substitute a bathtub faucet your self with the correct instruments and supplies. Nevertheless, if you’re not snug working with plumbing, it’s best to rent an expert.
How lengthy does it take to interchange a bathtub faucet?
Changing a bathtub faucet will usually take between 1 and a pair of hours.
What sort of faucet is finest for a bathtub?
One of the best sort of faucet for a bathtub will rely in your private preferences. Nevertheless, a number of the hottest forms of tub taps embrace single-handle taps, double-handle taps, and waterfall taps.
