In case you’re like most individuals, you in all probability have a PopSocket in your telephone. These helpful little devices are a good way to maintain your telephone from slipping out of your hand, they usually may also be used as a stand for watching movies or FaceTime. However what occurs when your PopSocket falls off? Don’t be concerned, it is simple to restick it. This is how.
Step one is to wash the floor of your telephone the place you wish to restick the PopSocket. Use a rubbing alcohol wipe or a cotton ball dipped in rubbing alcohol to take away any dust or oil. As soon as the floor is clear, peel off the backing of the PopSocket and press it firmly into place. Maintain it for a number of seconds to verify it is safe.
In case you’re having hassle getting the PopSocket to stay, you possibly can attempt utilizing a hair dryer to warmth up the adhesive. Simply watch out to not maintain the hair dryer too near the PopSocket, or you could possibly injury it. As soon as the adhesive is heat, press the PopSocket into place and maintain it for a number of seconds. It ought to now be securely connected to your telephone.
Eradicating the Popsocket
Eradicating a Popsocket requires cautious steps to keep away from damaging the gadget or the floor it’s connected to. Observe these detailed directions to efficiently detach the Popsocket:
1. Find the Launch Tab: Establish the small, grooved tab situated on the bottom of the Popsocket. That is the important thing to releasing the grip.
a. Push and Slide: Press down firmly on the discharge tab along with your thumb or finger. Whereas making use of strain, gently slide the tab ahead within the path of the arrow.
b. Break the Grip: As you slide the tab, the Popsocket’s grip will start to weaken. Proceed sliding till the grip utterly releases.
c. Carry the Popsocket: As soon as the grip is damaged, rigorously elevate the Popsocket straight upwards from the floor. Keep away from pulling it at an angle to stop any injury.
2. Take away the Adhesive: If any adhesive residue stays on the floor, gently wipe it away with a comfortable material or a cotton swab dipped in rubbing alcohol.
3. Clear the Popsocket: To organize the Popsocket for reattaching, clear the adhesive floor completely with rubbing alcohol and a cotton swab. Permit it to air dry utterly earlier than reusing.
Getting ready the Floor
Guaranteeing a clear and dry floor is essential for profitable Popsocket reattachment. This course of may be damaged down into three key steps:
Cleansing the Floor
Totally clear the floor the place the Popsocket might be reattached utilizing a rubbing alcohol-based resolution or a devoted gadget cleansing wipe. This may take away any dust, oil, or residue that might intrude with adhesion. Permit the floor to dry utterly earlier than continuing.
Eradicating Current Adhesive
If there’s any remaining adhesive from the earlier Popsocket, gently scrape it away utilizing a plastic instrument, corresponding to a bank card or a guitar choose. Keep away from utilizing sharp objects that might injury the floor. If the adhesive is especially cussed, you need to use a light adhesive remover, however take a look at it on an not noticeable space first to make sure it doesn’t injury the floor.
Making use of Adhesive
If vital, apply a skinny layer of adhesive to the Popsocket. Keep away from utilizing extreme adhesive, as this will create a large number and scale back the bond’s energy. The kind of adhesive used will depend upon the fabric of the floor and the Popsocket. Seek the advice of the Popsocket producer’s directions for particular suggestions.
Making use of Adhesive
As soon as you’ve got eliminated the outdated adhesive, it is time to apply new adhesive. Listed here are some ideas:
**Select the precise adhesive.** Not all adhesives are created equal. For PopSockets, you may wish to use a robust adhesive that can maintain as much as every day use. Some good choices embrace Gorilla Glue Tremendous Glue or Loctite Tremendous Glue.
**Apply the adhesive sparingly.** A bit of little bit of adhesive goes a good distance. An excessive amount of adhesive could make a large number and weaken the bond.
**Use a toothpick or cotton swab to use the adhesive.** This may show you how to get the adhesive into the small crevices of the PopSocket.
**Let the adhesive dry utterly.** This will likely take a number of hours or in a single day. Do not attempt to use the PopSocket till the adhesive is totally dry.
**This is a step-by-step information to making use of adhesive to a PopSocket:**
| Step | Directions |
|---|---|
| 1 | Take away the outdated adhesive from the PopSocket and telephone case. |
| 2 | Select the precise adhesive and apply it sparingly to the PopSocket. |
| 3 | Use a toothpick or cotton swab to use the adhesive into the small crevices of the PopSocket. You’ll want to get the adhesive into the corners and edges. |
| 4 | Let the adhesive dry utterly. This will likely take a number of hours or in a single day. |
| 5 | As soon as the adhesive is dry, reattach the PopSocket to your telephone case. |
Centering the Popsocket
To middle the Popsocket, begin by aligning the bottom of the Popsocket with the middle of your telephone or case. Use your finger or a instrument to softly press down on the bottom of the Popsocket till it’s firmly connected.
Subsequent, use your fingertips to carry the Popsocket in place when you gently pull the highest of the Popsocket in the direction of the middle of your telephone or case. Proceed pulling till the highest of the Popsocket is aligned with the middle of the bottom.
Lastly, use your fingertips to softly press down on the highest of the Popsocket till it’s firmly connected. Verify to guarantee that the Popsocket is centered and safe earlier than utilizing it.
| Step | Directions |
|---|---|
| 1 | Align the Popsocket’s base with the middle of your telephone or case. |
| 2 | Maintain the Popsocket’s base in place and pull the highest in the direction of the middle. |
| 3 | Press down on the highest of the Popsocket till it is safe and centered. |
Urgent Down
As soon as the adhesive is in place, it is time to press down firmly on the PopSocket. Use your fingers to use even strain throughout all the floor of the PopSocket, ensuring that every one edges are securely connected. Maintain the strain for no less than 30 seconds to make sure that the adhesive has had sufficient time to bond with the floor.
To reinforce the bond additional, you need to use a heavy object to overwhelm the PopSocket whereas it dries. Place the article on high of the PopSocket and depart it there for a number of hours or in a single day. This extra weight will assist to press the PopSocket into the floor and create a stronger bond.
As soon as the adhesive has dried utterly, your PopSocket might be securely connected to your gadget or case. Now you can use it to carry your gadget, prop it up for hands-free viewing, and even wrap earbuds round it for tangle-free storage.
| Adhesive Sort | Drying Time |
|---|---|
| 3M VHB Adhesive | 24 hours |
| Tremendous Glue | 1 hour |
| Epoxy Resin | 2-3 days |
Curing the Adhesive
If the adhesive continues to be cheesy, you possibly can attempt to treatment it by exposing it to air. Place the PopSocket on a flat floor with the adhesive facet up. Go away it there for a number of hours, and even in a single day, to permit the air to flow into and dry out the adhesive.
If the adhesive is just not cheesy, you possibly can attempt to warmth it up. Use a hair dryer on a low setting to heat the adhesive for a couple of minutes. This may soften the adhesive and make it extra pliable.
As soon as the adhesive is heated, press the PopSocket firmly onto the again of your telephone. Maintain it in place for a couple of minutes to permit the adhesive to chill and bond with the telephone.
Listed here are some further ideas for curing the adhesive:
- If the adhesive continues to be not sticking, you possibly can attempt making use of a small quantity of tremendous glue to the again of the PopSocket. Watch out to not use an excessive amount of glue, as it may injury your telephone.
- In case you are having hassle getting the PopSocket to stay to a curved floor, you possibly can attempt utilizing a curved adhesive pad. These pads are designed to assist PopSockets follow curved surfaces, such because the again of an iPhone X.
- In case you are nonetheless having hassle getting the PopSocket to stay, you possibly can attempt contacting PopSockets customer support. They are able to offer you further help.
Testing the Bond
As soon as you’ve got cleaned each surfaces, it is time to take a look at the bond. To do that, merely apply a small quantity of strain to the PopSocket whereas it is connected to your telephone or case. If the PopSocket would not budge, then the bond is powerful and also you’re good to go. Nonetheless, if the PopSocket comes unfastened, then you definitely’ll must repeat the cleansing course of and take a look at once more.
Listed here are some further ideas for testing the bond:
- Apply strain to the PopSocket from completely different angles to guarantee that the bond is safe throughout.
- If the PopSocket continues to be coming unfastened, attempt utilizing a stronger adhesive. Gorilla Glue is an efficient choice for this.
- In case you’re nonetheless having hassle getting the PopSocket to stay, you possibly can attempt contacting the producer for help.
Here’s a desk summarizing the other ways to check the bond of your PopSocket:
| Methodology | Description |
|---|---|
| Stress take a look at | Apply strain to the PopSocket from completely different angles to guarantee that the bond is safe throughout. |
| Adhesive take a look at | If the PopSocket continues to be coming unfastened, attempt utilizing a stronger adhesive. Gorilla Glue is an efficient choice for this. |
| Producer contact | In case you’re nonetheless having hassle getting the PopSocket to stay, you possibly can attempt contacting the producer for help. |
Troubleshooting Unfastened Popsockets
In case your Popsocket is feeling unfastened, there are some things you are able to do to attempt to repair it.
1. Verify the adhesive
The very first thing to test is the adhesive on the again of the Popsocket. If it is soiled or broken, it could not be capable of maintain the Popsocket in place. To wash the adhesive, use a cotton swab dipped in rubbing alcohol. Watch out to not get any rubbing alcohol on the Popsocket itself, because it might injury the end.
2. Heat up the adhesive
If the adhesive is chilly, it could not be capable of maintain the Popsocket in place. To heat up the adhesive, use a hair dryer on the low setting. Maintain the hair dryer about 6 inches away from the Popsocket and blow sizzling air on it for about 30 seconds.
3. Apply strain
As soon as the adhesive is heat, apply strain to the Popsocket to assist it stick. You are able to do this by urgent on the Popsocket along with your thumb for about 30 seconds.
4. Let the adhesive dry
As soon as you’ve got utilized strain to the Popsocket, let the adhesive dry utterly. This will likely take a number of hours.
5. Attempt a unique floor
If the adhesive nonetheless is not holding the Popsocket in place, attempt sticking it to a unique floor. Some surfaces, corresponding to silicone or rubber, will not be suitable with the adhesive on the Popsocket.
6. Use a Popsocket mount
In case you’re having hassle getting the Popsocket to stay to your telephone, you possibly can attempt utilizing a Popsocket mount. Popsocket mounts are designed to carry Popsockets in place on quite a lot of surfaces.
7. Contact Popsocket
In case you’ve tried all the above troubleshooting ideas and your Popsocket continues to be unfastened, you possibly can contact Popsocket for assist. Popsocket provides a guaranty on its merchandise, and they are able to exchange your Popsocket if it is faulty.
8. Relocate the Popsocket to strengthen its grip:
Establish a location on the telephone’s floor that gives a wider, flatter space, permitting for extra adhesive contact. This may very well be the middle of the telephone’s again panel or a location with a easy, non-textured floor.
Earlier than relocating the Popsocket, completely clear each the telephone’s floor and the Popsocket’s base with rubbing alcohol. Permit each surfaces to dry utterly earlier than continuing.
Peel off the Popsocket’s base from its present location and align it with the brand new location you’ve got recognized. Press down firmly for a number of seconds, guaranteeing there aren’t any air bubbles trapped beneath the adhesive.
Go away the Popsocket undisturbed for no less than 24 hours to permit the adhesive to completely treatment and bond with the telephone’s floor. This prolonged curing time will considerably improve the Popsocket’s grip.
| Drawback | Resolution |
|---|---|
| Popsocket retains falling off | Clear the adhesive on the again of the Popsocket and the floor of your telephone. Apply strain to the Popsocket to assist it stick. |
| Popsocket is unfastened | Heat up the adhesive on the again of the Popsocket with a hair dryer. Apply strain to the Popsocket to assist it stick. |
| Popsocket will not follow my telephone | Attempt utilizing a Popsocket mount. Popsocket mounts are designed to carry Popsockets in place on quite a lot of surfaces. |
Ideas for Higher Adhesion
Listed here are some ideas that will help you get the perfect adhesion out of your PopSocket:
1. Clear the Floor
Make certain the floor of your telephone or case is clear and dry earlier than making use of the PopSocket. This may assist to take away any dust or oils that might stop the adhesive from sticking correctly.
2. Use a Hair Dryer
Warmth might help to activate the adhesive on the PopSocket. Use a hair dryer to heat up the adhesive for 30 seconds earlier than making use of it to your telephone.
3. Press Firmly
Upon getting utilized the PopSocket to your telephone, press down firmly for 30 seconds. This may assist to make sure that the adhesive bonds correctly.
4. Keep away from Utilizing the PopSocket Instantly
Permit the adhesive to treatment for twenty-four hours earlier than utilizing the PopSocket. This may give the adhesive time to set correctly.
5. Do not Overuse the PopSocket
The PopSocket is designed for use as a short lived stand or grip. Keep away from placing an excessive amount of weight on it, as this might trigger the adhesive to fail.
6. Take away the PopSocket Rigorously
If you could take away the PopSocket, achieve this rigorously. Peel the PopSocket off slowly and gently, being cautious to not injury the adhesive.
7. Use a PopSocket Mount
If you wish to use your PopSocket in your automotive or in your desk, think about using a PopSocket mount. A mount will assist to maintain your telephone safe and in place.
8. Exchange the Adhesive
The adhesive in your PopSocket will ultimately put on out. In case you discover that your PopSocket is now not sticking correctly, you possibly can exchange the adhesive with a brand new one.
9. Troubleshooting Adhesive Issues
In case you are having hassle getting your PopSocket to stay, there are some things you possibly can attempt:
| Drawback | Resolution |
|---|---|
| The PopSocket is just not sticking to my telephone | Make certain the floor of your telephone is clear and dry. You may as well attempt utilizing a hair dryer to heat up the adhesive. |
| The PopSocket is falling off my telephone | Press down firmly on the PopSocket for 30 seconds to make sure that the adhesive bonds correctly. Keep away from overusing the PopSocket and take away it rigorously when not in use. |
| The adhesive on my PopSocket is broken | Exchange the adhesive with a brand new one. |
Cleansing a Popsocket
Earlier than you possibly can restick your Popsocket, it have to be cleaned. Listed here are the steps on clear your Popsocket:
- Find a flat floor that’s clear and dry.
- Place the Popsocket on the flat floor with the adhesive facet going through up.
- Pour a small quantity of isopropyl alcohol (rubbing alcohol) onto a cotton ball or swab.
- Gently rub the cotton ball or swab over the adhesive floor of the Popsocket in round motions.
- Use a clear cotton ball or swab to wipe away any remaining alcohol and dust.
- Permit the Popsocket to air dry utterly earlier than making use of any new adhesive.
Extra Ideas for Cleansing a Popsocket
Listed here are some further ideas for cleansing your Popsocket:
- Don’t use any harsh chemical compounds or cleaners to wash your Popsocket, as these might injury the adhesive.
- If the adhesive in your Popsocket is especially soiled or sticky, it’s possible you’ll must soak it in isopropyl alcohol for a couple of minutes earlier than wiping it clear.
- As soon as your Popsocket is clear and dry, you possibly can apply a brand new layer of adhesive to it and reattach it to your gadget.
| Cleansing Resolution | Warning |
|---|---|
| Water | Might not be efficient towards all forms of dust and dirt. |
| Isopropyl alcohol (rubbing alcohol) | Will be harsh on the adhesive, so use sparingly. |
| WD-40 | Can injury the adhesive if not used correctly. |
How To Restick A Popsocket
In case your PopSocket has come unfastened, don’t fret! It is simple to restick it. This is how:
- Clear the floor of your gadget. Use a rubbing alcohol wipe or a cotton ball dipped in rubbing alcohol to wash the floor the place you wish to restick the PopSocket. This may take away any dust or oil that might stop the PopSocket from sticking.
- Take away the outdated adhesive from the PopSocket. Use your fingernail or a pointy object to rigorously take away the outdated adhesive from the again of the PopSocket. Watch out to not injury the PopSocket.
- Apply new adhesive to the PopSocket. Use a small quantity of tremendous glue or epoxy to use a skinny layer of adhesive to the again of the PopSocket. Watch out to not use an excessive amount of adhesive, or it’s going to ooze out and make a large number.
- Restick the PopSocket to your gadget. Press the PopSocket firmly into place in your gadget. Maintain it in place for a number of seconds to permit the adhesive to set.
Folks Additionally Ask About How To Restick A Popsocket
How do you restick a PopSocket with out glue?
There are a number of methods to restick a PopSocket with out glue. A technique is to make use of a double-sided adhesive tape. Minimize a small piece of tape and apply it to the again of the PopSocket. Then, press the PopSocket firmly into place in your gadget.
One other strategy to restick a PopSocket with out glue is to make use of a hair dryer. Warmth the adhesive on the again of the PopSocket with a hair dryer till it turns into comfortable. Then, press the PopSocket firmly into place in your gadget.
How do you repair a sticky PopSocket?
In case your PopSocket is sticky, you possibly can attempt cleansing it with a rubbing alcohol wipe. Rub the wipe over the sticky floor till it’s now not sticky. You may as well attempt utilizing a cotton ball dipped in rubbing alcohol.
How do you take away a PopSocket with out damaging the telephone?
To take away a PopSocket with out damaging your telephone, use a bank card or a pointy object to rigorously pry the PopSocket off of your telephone. Watch out to not injury the telephone or the PopSocket.
