Field joints are a robust and enticing method to be part of two items of wooden at a proper angle. They’re typically utilized in furnishings making, however will also be utilized in different tasks corresponding to bins, frames, and drawers. Making a jig for field joints is a comparatively easy course of, and it could possibly prevent lots of effort and time in the long term. On this article, we are going to present you the way to make a jig for field joints utilizing a router.
To make a jig for field joints, you’ll need the next supplies:
- A chunk of three/4-inch plywood that’s not less than 12 inches large and 18 inches lengthy
- A router with a 1/4-inch straight bit
- A 1/4-inch brad level drill bit
- A drill press
- A countersink bit
- Wooden glue
- Clamps
- Security glasses
- Ear safety
After getting gathered your supplies, you’ll be able to observe these steps to make your jig:
1. Reduce the plywood to the specified dimension.
2. Mark the middle of the plywood.
3. Drill a 1/4-inch gap on the middle of the plywood.
4. Insert the router bit into the router.
5. Regulate the router to the specified depth of minimize.
6. Place the plywood on the drill press desk.
7. Align the middle of the plywood with the middle of the drill press desk.
8. Clamp the plywood to the drill press desk.
9. Activate the drill press and slowly feed the plywood into the router bit.
10. Proceed feeding the plywood into the router bit till the specified depth of minimize is reached.
11. Flip off the drill press.
12. Unclamp the plywood from the drill press desk.
13. Take away the router bit from the router.
14. Countersink the holes within the plywood.
15. Apply wooden glue to the perimeters of the plywood.
16. Clamp the plywood collectively.
17. Enable the glue to dry utterly.
How To Make A Jig For Field Joints
Field joints are a robust and enticing method to be part of two items of wooden collectively. They’re typically utilized in furnishings making, however will also be utilized in different tasks corresponding to bins, drawers, and frames. A jig is a instrument that lets you make exact and repeatable cuts, and it’s important for making field joints.
There are numerous several types of field joint jigs out there, however the commonest sort is the table-mounted jig. This kind of jig is mounted to the desk of a desk noticed, and it makes use of a sequence of blades to chop the slots for the field joints. Desk-mounted jigs are comparatively simple to make use of, they usually can produce very correct outcomes.
In case you are new to woodworking, I like to recommend utilizing a table-mounted field joint jig. Nonetheless, in case you are extra skilled, chances are you’ll need to think about using a extra superior sort of jig, corresponding to a dovetail jig or a finger joint jig.
Listed below are the steps on the way to make a jig for field joints:
1. Select the kind of field joint jig that you simply need to use.
2. Collect the mandatory supplies.
3. Observe the directions that got here with the jig to assemble it.
4. Take a look at the jig to be sure that it’s working correctly.
5. Use the jig to chop the slots for the field joints.
Folks Additionally Ask About How To Make A Jig For Field Joints
How do you make a field joint jig for a desk noticed?
To make a field joint jig for a desk noticed, you’ll need the next supplies:
- A chunk of plywood or MDF
- A desk noticed
- A dado blade
- A miter gauge
- A measuring tape
- A pencil
After getting gathered your supplies, you’ll be able to observe these steps to make the jig:
1. Reduce a chunk of plywood or MDF to the specified dimension. The scale of the jig will rely on the dimensions of the field joints that you simply need to make.
2. Mark the middle of the plywood or MDF.
3. Use the desk noticed to chop a dado blade into the plywood or MDF. The dado blade must be the identical width because the thickness of the wooden that you may be utilizing to make the field joints.
4. Reduce a miter gauge to suit the dado blade.
5. Connect the miter gauge to the desk noticed.
6. Measure and mark the specified width of the field joints on the plywood or MDF.
7. Use the desk noticed to chop the slots for the field joints.
How do you make a jig for finger joints?
To make a jig for finger joints, you’ll need the next supplies:
- A chunk of plywood or MDF
- A desk noticed
- A dado blade
- A miter gauge
- A measuring tape
- A pencil
After getting gathered your supplies, you’ll be able to observe these steps to make the jig:
1. Reduce a chunk of plywood or MDF to the specified dimension. The scale of the jig will rely on the dimensions of the finger joints that you simply need to make.
2. Mark the middle of the plywood or MDF.
3. Use the desk noticed to chop a dado blade into the plywood or MDF. The dado blade must be the identical width because the thickness of the wooden that you may be utilizing to make the finger joints.
4. Reduce a miter gauge to suit the dado blade.
5. Connect the miter gauge to the desk noticed.
6. Measure and mark the specified width of the finger joints on the plywood or MDF.
7. Use the desk noticed to chop the slots for the finger joints.
