In case your cigarette lighter is not working, it could possibly be because of a blown fuse. Checking the fuse is a straightforward and fast technique to decide if that is the issue. On this article, we’ll offer you a step-by-step information on how one can test a cigarette lighter fuse, so you will get your lighter working once more very quickly.
First, you should find the fuse field. That is usually positioned below the dashboard or within the engine compartment. As soon as you’ve got discovered the fuse field, open it and find the fuse that’s chargeable for the cigarette lighter. The fuse will likely be labeled, so it must be straightforward to search out. As soon as you’ve got discovered the fuse, take away it and examine it. If the fuse is blown, you will see a break within the steel wire contained in the fuse. If the fuse is blown, you will want to interchange it with a brand new one of many identical amperage.
Lastly, reinsert the brand new fuse into the fuse field and shut the fuse field. Strive the cigarette lighter once more. The cigarette lighter must be working once more, but when it is not, you need to seek the advice of a professional mechanic. Changing a fuse is a comparatively easy job, however in the event you’re not comfy doing it your self, it is best to depart it to an expert.
Find the Fuse Field
The fuse field is often positioned below the dashboard, both on the driving force’s or passenger’s facet. To entry it, you’ll need to open the fuse field cowl. Typically, the fuse field cowl is positioned contained in the glove compartment or below the hood. In case you are nonetheless unable to find the fuse field, seek the advice of the car’s proprietor’s guide for particular directions.
After you have positioned the fuse field, you’ll need to establish the fuse that corresponds to the cigarette lighter. This data is often printed on the fuse field cowl or within the proprietor’s guide. When you can’t discover the fuse labeled “cigarette lighter,” search for a fuse that’s labeled “accent” or “energy outlet.”
| Fuse sort | Amperage |
|---|---|
| Commonplace fuse | 10-15 amps |
| Mini fuse | 5-7.5 amps |
Take away the Fuse
To take away the fuse, you will have to find the fuse field. That is usually positioned below the dashboard or within the engine compartment. As soon as you’ve got discovered the fuse field, open it up and find the cigarette lighter fuse. Normally, it’s labeled as “CIG” or “12V”.
As soon as you’ve got discovered the fuse, use a pair of needle-nose pliers to tug it straight out of the fuse field. Watch out to not bend or harm the fuse once you do that.
This is a extra detailed step-by-step information for eradicating the cigarette lighter fuse:
1. Find the fuse field
The fuse field is often positioned below the dashboard on the driving force’s facet, however it may also be within the engine compartment or the trunk. Seek the advice of your car’s proprietor’s guide to search out the precise location of the fuse field.
2. Open the fuse field
The fuse field can have a canopy that may be opened by hand or with a device. Watch out to not harm the quilt once you open it.
3. Discover the cigarette lighter fuse
After you have the fuse field open, you will want to search out the cigarette lighter fuse. The fuse will likely be labeled with the phrase “CIG” or “12V.” If you cannot discover the cigarette lighter fuse, seek the advice of your car’s proprietor’s guide for assist.
4. Take away the fuse
As soon as you’ve got discovered the cigarette lighter fuse, use a pair of needle-nose pliers to tug it straight out of the fuse field. Watch out to not bend or harm the fuse once you do that.
This is a desk summarizing the steps for eradicating the cigarette lighter fuse:
| Step | Description |
|---|---|
| 1 | Find the fuse field. |
| 2 | Open the fuse field. |
| 3 | Discover the cigarette lighter fuse. |
| 4 | Take away the fuse. |
Examine the Fuse for Blown Situation
To test the fuse for a blown situation, you’ll need a multimeter. A multimeter is a tool that measures electrical present, voltage, and resistance. You should buy a multimeter at most {hardware} shops or on-line. After you have a multimeter, observe these steps to test the fuse:
Step 1: Set the multimeter to the ohms setting.
The ohms setting is often denoted by the Greek letter omega (Ω). When you can’t discover the ohms setting, seek the advice of the multimeter’s guide.
Step 2: Join the multimeter probes to the fuse.
One probe must be linked to every finish of the fuse. If the fuse is blown, the multimeter will show an infinite resistance studying (OL). If the fuse will not be blown, the multimeter will show a resistance studying of lower than infinity.
Step 3: Exchange the fuse whether it is blown.
If the fuse is blown, you’ll need to interchange it with a brand new one of many identical amperage. You should buy fuses at most {hardware} shops or on-line. After you have changed the fuse, reassemble the cigarette lighter and take a look at it to ensure it’s working correctly.
Here’s a desk summarizing the steps on how one can test a fuse for a blown situation:
| Step | Motion |
|---|---|
| 1 | Set the multimeter to the ohms setting. |
| 2 | Join the multimeter probes to the fuse. |
| 3 | Exchange the fuse whether it is blown. |
Determine the Fuse Field
The situation of the fuse field can fluctuate relying on the car make and mannequin. Typically, it’s positioned below the dashboard or within the engine compartment. Seek the advice of your car’s proprietor’s guide to find out the precise location.
Find the Cigarette Lighter Fuse
After you have recognized the fuse field, search for the fuse labeled “Cigarette Lighter” or “Energy Outlet.” Usually, the fuses are color-coded, with crimson indicating a 10-amp fuse. Seek the advice of the fuse diagram offered within the fuse field cowl or your proprietor’s guide for affirmation.
Examine the Fuse
Rigorously study the fuse for any indicators of injury. A blown fuse can have a damaged filament, which may be simply seen when held as much as a light-weight supply. If the fuse seems intact, skip to the subsequent step.
Exchange the Fuse
If the fuse is blown, it must be changed with a brand new one of many identical amperage. Find a brand new fuse of the suitable amperage within the fuse field or buy one from an auto elements retailer. Use the fuse puller offered within the fuse field to take away the previous fuse and insert the brand new one.
Check the Fuse with a Multimeter (Non-obligatory)
When you have a multimeter, you may as well take a look at the fuse for continuity. Set the multimeter to the ohms setting and place the probes on every finish of the fuse. If the multimeter shows a low resistance studying (often beneath 1 ohm), the fuse is sweet. If the studying is infinite, the fuse is blown.
This is a desk summarizing the take a look at outcomes:
| Check Outcome | Fuse Standing |
|---|---|
| Low resistance studying | Good |
| Infinite resistance studying | Blown |
After you have examined or changed the fuse, activate the car and test if the cigarette lighter or energy outlet is working correctly.
Exchange the Fuse
Firstly, be sure that the car is parked with the engine off and the parking brake engaged. Subsequent, find the fuse field. That is often discovered below the dashboard on the driving force’s facet. Open the fuse field cowl and find the fuse for the cigarette lighter. This will likely be labeled with an emblem or надпись “CIG” or “POWER OUTLET”.
After you have discovered the fuse, test it for harm. Whether it is blown, you’ll need to interchange it with a brand new one. Use a fuse puller to take away the blown fuse and insert a brand new one of many identical amperage. Shut the fuse field cowl and switch the ignition on. The cigarette lighter ought to now be working once more.
Here’s a step-by-step information to changing the fuse:
- Park the car in a secure location and switch off the engine.
- Have interaction the parking brake.
- Find the fuse field. That is often discovered below the dashboard on the driving force’s facet.
- Open the fuse field cowl.
- Find the fuse for the cigarette lighter. This will likely be labeled with an emblem or надпись “CIG” or “POWER OUTLET”.
- Examine the fuse for harm. Whether it is blown, substitute it with a brand new one of many identical amperage.
Fuse Measurement Fuse Sort 10 amps Mini blade fuse 15 amps Mini blade fuse 20 amps Mini blade fuse - Shut the fuse field cowl.
- Flip the ignition on.
- The cigarette lighter ought to now be working once more.
If the cigarette lighter continues to be not working after changing the fuse, there could also be one other drawback. This could possibly be a defective cigarette lighter socket, a wiring situation, or an issue with the fuse field itself. On this case, you’ll need to take the car to a mechanic for additional prognosis and restore.
Reset the Fuse Field
When you have checked all the fuses and they’re all intact, the subsequent step is to reset the fuse field. This may clear any tripped fuses and restore energy to the cigarette lighter.
To reset the fuse field, observe these steps:
- Find the fuse field. It’s often positioned below the dashboard on the driving force’s facet.
- Open the fuse field cowl.
- Find the fuse for the cigarette lighter. Will probably be labeled “CIGAR” or “POWER OUTLET”.
- Take away the fuse and wait 10 seconds.
- Reinstall the fuse.
- Shut the fuse field cowl.
- Strive the cigarette lighter once more.
Examine the Wiring
Study the wiring connecting the cigarette lighter to the fuse field. Search for any seen indicators of injury, equivalent to damaged wires, unfastened connections, or burn marks. When you discover any points, it is really useful to have them repaired or changed by a professional auto electrician.
Examine the Fuse
- Find the fuse field in your car, often located below the dashboard, below the hood, or within the trunk.
- Determine the fuse chargeable for the cigarette lighter. Confer with the proprietor’s guide or the fuse field diagram.
- Take away the fuse utilizing a pair of needle-nose pliers or a fuse puller.
- Examine the fuse for harm. If the steel filament contained in the fuse is damaged or blown, the fuse is blown and must be changed.
Exchange the Fuse
If the fuse is blown, substitute it with a brand new fuse of the identical amperage. By no means use a fuse with the next amperage ranking, as this will result in electrical issues or harm. As soon as the brand new fuse is put in, insert it absolutely into the fuse socket.
After changing the fuse, take a look at the cigarette lighter to make sure it’s working correctly. If the issue persists, it is advisable to seek the advice of an expert auto electrician for additional troubleshooting and repairs.
Examine the Socket
If the fuse will not be blown and the cigarette lighter nonetheless would not work, the socket itself could also be defective. Use a multimeter to test for continuity between the optimistic and damaging terminals of the socket. If there isn’t a continuity, the socket could have to be changed.
Different Potential Causes
Different potential causes of a non-functioning cigarette lighter embody:
| Trigger | Resolution |
|---|---|
| Defective wiring harness | Restore or substitute the wiring harness. |
| Unfastened floor connection | Tighten the bottom connection. |
| Faulty cigarette lighter | Exchange the cigarette lighter. |
In case you are unable to diagnose or resolve the problem by yourself, search help from a professional auto electrician.
Troubleshooting Widespread Points
Electrical Downside
The commonest reason for a cigarette lighter fuse blowing is {an electrical} drawback. This could possibly be attributable to a brief circuit, a defective wire, or a blown fuse. To troubleshoot this situation, you’ll need to test the wiring and fuses.
Blown Fuse
A blown fuse is the probably reason for a cigarette lighter not working. To test the fuse, you’ll need to find the fuse field and discover the fuse for the cigarette lighter. After you have discovered the fuse, you possibly can test it by wanting on the filament contained in the fuse. If the filament is damaged, then the fuse is blown and can have to be changed.
Defective Wire
A defective wire may also trigger the cigarette lighter to cease working. To test the wire, you’ll need to examine the wire for any harm. If the wire is broken, it’ll have to be changed.
Quick Circuit
A brief circuit may also trigger the cigarette lighter to cease working. To test for a brief circuit, you’ll need to make use of a multimeter to check the continuity of the circuit.
Malfunctioning Lighter Component
The lighter ingredient is the a part of the cigarette lighter that really ignites the cigarette. If the lighter ingredient is malfunctioning, it won’t be able to ignite the cigarette. To check the lighter ingredient, you’ll need to take away the cigarette lighter from the automotive and maintain it the other way up. If the lighter ingredient is working correctly, it’ll produce a spark once you press the button.
Defective Ignition Swap
The ignition change is the a part of the automotive that activates the ability to the cigarette lighter. If the ignition change is defective, it won’t be able to activate the ability to the cigarette lighter. To check the ignition change, you’ll need to make use of a multimeter to check the continuity of the circuit.
Unfastened Connections
Unfastened connections may also trigger the cigarette lighter to cease working. To test for unfastened connections, you’ll need to examine the connections on the cigarette lighter and the fuse field.
Soiled Contacts
Soiled contacts may also trigger the cigarette lighter to cease working. To wash the contacts, you’ll need to make use of a cotton swab dipped in rubbing alcohol.
Defective Cigarette Lighter Meeting
If all else fails, the issue could also be with the cigarette lighter meeting itself. On this case, you’ll need to interchange your entire meeting.
| Part | The right way to Check |
|---|---|
| Fuse | Search for a damaged filament |
| Wire | Examine for harm |
| Quick circuit | Use a multimeter to check continuity |
| Lighter ingredient | Take away lighter and maintain the other way up. Press button to test for spark |
| Ignition change | Use a multimeter to check continuity |
| Unfastened connections | Examine connections at lighter and fuse field |
| Soiled contacts | Clear contacts with cotton swab and rubbing alcohol |
Security Precautions
Earlier than making an attempt to test the cigarette lighter fuse, it’s essential to take the next security precautions:
- Unplug the Battery: Disconnect the damaging terminal of your automotive’s battery to remove any threat {of electrical} shock.
- Use Correct Instruments: All the time make the most of insulated instruments when working with electrical parts to stop unintended contact with stay wires.
- Examine for Harm: Rigorously examine the fuse field for any indicators of injury, equivalent to burnt or melted parts.
- Put on Protecting Gear: Put on security glasses and gloves to guard your self from any potential sparks or flying particles.
- Work in a Protected Location: Carry out this job in a well-ventilated space away from flammable supplies and liquids.
- Keep away from Smoking: Chorus from smoking or lighting any flames close to the fuse field or electrical parts.
- Do Not Contact Uncovered Wires: Not at all must you contact any uncovered wires or electrical connections.
- Deal with Fuses with Care: Fuses are delicate parts, so at all times deal with them gently to stop harm.
- Reconnect Battery Safely: After finishing the restore, fastidiously reconnect the damaging terminal of the battery, guaranteeing its correct connection.
- Check the Circuit: As soon as the battery is reconnected, use a multimeter or take a look at mild to make sure the repaired circuit is functioning accurately.
The right way to Examine a Cigarette Lighter Fuse
A cigarette lighter fuse is a small electrical gadget that protects the lighter from harm within the occasion of a brief circuit. If the fuse blows, the lighter won’t work. Checking the fuse is a straightforward course of that may be performed in a couple of minutes.
- Find the fuse. The fuse is often positioned within the base of the lighter, close to the optimistic terminal. Will probably be a small, cylindrical gadget with two steel terminals.
- Take away the fuse. Use a pair of pliers to softly pull the fuse out of its socket. Watch out to not contact the steel terminals.
- Examine the fuse. The fuse will likely be fabricated from glass or ceramic. If the fuse is blown, you will notice a skinny wire contained in the fuse that has melted. If the fuse will not be blown, the wire will likely be intact.
- Exchange the fuse. If the fuse is blown, you’ll need to interchange it with a brand new one. The brand new fuse must be the identical amperage because the previous fuse.
- Reinstall the fuse. Push the brand new fuse into the socket till it clicks into place.
- Check the lighter. Plug the lighter into an influence outlet and press the button. The lighter ought to now work.
Individuals Additionally Ask
How do I do know if my cigarette lighter fuse is blown?
In case your cigarette lighter doesn’t work, the fuse could also be blown. You possibly can test the fuse by following the steps outlined above.
The place can I discover a alternative fuse for my cigarette lighter?
Alternative fuses for cigarette lighters may be discovered at most {hardware} shops and auto elements shops.
How do I forestall my cigarette lighter fuse from blowing?
The easiest way to stop your cigarette lighter fuse from blowing is to keep away from overloading the lighter. Don’t plug a number of gadgets into the lighter on the identical time, and don’t use the lighter to energy high-wattage home equipment.
